The MFS 800 Semi ADK-16 is the wide-boom option in the mounted range: sixteen metres of coverage per pass, with hydraulic lift as standard. Against a 12-metre machine that's a third fewer passes over the same land — fewer tramlines, less wheel compaction, and a day's spraying done measurably earlier.
The ADK boom is built heavier than the MK to carry the extra width, and the hydraulic lift that's optional thinking on a 12-metre boom becomes essential at 16: at this width, keeping the boom parallel to the ground from the seat is what protects the evenness you bought the width for.
Sixteen metres at 50 cm spacing puts more than thirty ARAG triple nozzle bodies to work per pass. Fewer passes means fewer tramlines, less overlap to manage, and more hectares between refills of the 800-litre tank.
At 16 metres, a degree of tilt is a 14 cm height error at the boom tip. Seat-controlled hydraulic lift keeps the boom at target height as the land changes — the wide boom stays an advantage instead of becoming a liability.
The Annovi Reverberi AR 135 BP is a 550 rpm PTO-driven diaphragm pump with three BlueFlex semi-hydraulic diaphragms. It delivers up to 132 litres per minute at a maximum 20 bar — comfortable headroom to feed the full boom at working pressure while keeping the tank agitated.
The AR UCM 4 gives you a master shut-off, glycerine-filled pressure gauge and four section valves, each with anti-drip return suction — close half the boom on a headland without changing the pressure on the rest. A self-cleaning 50-mesh line filter sits ahead of the nozzles, so a dirty dam refill doesn't end the day.
| SKU | TIMFA604 |
| Tank | 800 L |
| Hydraulic boom | 16 m |
| Pump | AR135 |
| Control unit | UCM4 |
| Pump output | 132 L/min |
| Max pressure | 20 bar |
| Nozzle spacing | 50 cm — ARAG triple bodies |
| PTO speed | 540 rpm |
Built for growers who spray serious hectares with a mounted machine:
Width. A 16 m boom covers the same land in two-thirds of the passes of a 12 m boom — less time, less diesel, fewer wheel tracks. The trade-off is weight and the need for reasonable lift capacity; send us your tractor model and we'll confirm the match.
The AR 135 BP pump needs only about 5 kW (6.8 hp) at the PTO, so the limiting factor is lift capacity and stability with a full 800 L tank on the three-point hitch. Most utility tractors handle it comfortably — send us your tractor model and we'll confirm before you order.
Yes. Pump diaphragms and seals, control unit parts, nozzle bodies and tips are stocked at our Oudtshoorn workshop. Email abie@timagri.com or WhatsApp a photo of the part — most items ship same week.
Every TIMAGRI sprayer is commissioned on your farm: nozzles matched to your rows and target rate, pressure verified across all sections, and the operator walked through the controls before the first tank goes out.
Crop, row spacing, tractor horsepower — that's all we need to quote the right configuration, usually within one working day.
