MFS 800 MK-12 — mounted field sprayers
Mounted field TIMFA102

MFS 800 MK-12

The MFS 800 MK-12 takes the proven MFS layout and adds tank: 800 litres on the three-point hitch, which at typical vegetable rates means noticeably fewer trips to the fill point over a day's spraying. For mid-sized fields it's often the difference between finishing a block in one session or two.

The working parts are deliberately the same as the rest of the field range — AR 135 BP diaphragm pump, UCM 4 control unit, 12-metre mechanical boom with ARAG triple bodies at 50 cm spacing — so one set of spares and one set of habits covers every TIMAGRI field sprayer on the farm.

800 LTank
12 mMechanical boom
AR135Pump
UCM4Control unit
132 L/minPump output
20 barMax pressure
Why this machine

Built around the work

AR 135 BP pump — 132 L/min at 20 bar — diagram
01

AR 135 BP pump — 132 L/min at 20 bar

The Annovi Reverberi AR 135 BP is a 550 rpm PTO-driven diaphragm pump with three BlueFlex semi-hydraulic diaphragms. It delivers up to 132 litres per minute at a maximum 20 bar — comfortable headroom to feed the full boom at working pressure while keeping the tank agitated.

UCM 4 control unit with self-cleaning filter — diagram
02

UCM 4 control unit with self-cleaning filter

The AR UCM 4 gives you a master shut-off, glycerine-filled pressure gauge and four section valves, each with anti-drip return suction — close half the boom on a headland without changing the pressure on the rest. A self-cleaning 50-mesh line filter sits ahead of the nozzles, so a dirty dam refill doesn't end the day.

MK mechanical boom with ARAG triple nozzle bodies — diagram
03

MK mechanical boom with ARAG triple nozzle bodies

The MK boom folds manually and carries ARAG triple nozzle bodies at 50 cm spacing — swap between flat-fan, air-induction and hollow-cone tips in seconds by rotating the body, no tools. Sprung boom ends shrug off the fence pole you didn't see.

800 L capacity, fewer refills — diagram
04

800 L capacity, fewer refills

At 200 L/ha, the 800-litre tank covers four hectares per fill — a third more ground per trip than the 600. Internal agitation keeps suspensions mixed to the last fifty litres.

Specifications

MFS 800 MK-12 at a glance

SKUTIMFA102
Tank800 L
Mechanical boom12 m
PumpAR135
Control unitUCM4
Pump output132 L/min
Max pressure20 bar
Nozzle spacing50 cm — ARAG triple bodies
PTO speed540 rpm
Where it works

Crops & applications

The extra capacity suits growers stepping up from smaller mounted sprayers:

  • Field vegetablespotatoes, onions, brassicas — full-season programmes with fewer refill runs
  • Small grainswheat and barley blocks within reach of a 12 m boom
  • Pastures & lucernebroadleaf control and pest programmes on planted pasture

Options & upgrades

  • Albuz, MagnoJet or TeeJet nozzle tips to suit your chemistry
  • TIMAGRI Nova spray computer integration (rate control by ground speed)
  • Foam marker and chemical inductor on request
Questions

MFS 800 MK-12 — asked and answered

What tractor do I need for the MFS 800 MK-12?

The AR 135 BP pump needs only about 5 kW (6.8 hp) at the PTO, so the limiting factor is lift capacity and stability with a full 800 L tank on the three-point hitch. Most utility tractors handle it comfortably — send us your tractor model and we'll confirm before you order.

MFS 600 or MFS 800 — which one?

If your tractor lifts it comfortably, take the 800: a third more coverage per fill at the same boom width, pump and control unit. Choose the 600 where lift capacity or very short rows argue for less weight.

Are spare parts available in South Africa?

Yes. Pump diaphragms and seals, control unit parts, nozzle bodies and tips are stocked at our Oudtshoorn workshop. Email abie@timagri.com or WhatsApp a photo of the part — most items ship same week.

Is the MFS 800 MK-12 set up before delivery?

Every TIMAGRI sprayer is commissioned on your farm: nozzles matched to your rows and target rate, pressure verified across all sections, and the operator walked through the controls before the first tank goes out.

Tell us your rows. We'll spec the sprayer.

Crop, row spacing, tractor horsepower — that's all we need to quote the right configuration, usually within one working day.